dmesg - test benchmark
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-23-generic (buildd@crested) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu4) ) #36-Ubuntu SMP Tue Apr 10 20:39:51 UTC 2012 (Ubuntu 3.2.0-23.36-generic 3.2.14)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[ 0.000000] BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[ 0.000000] BIOS-e820: 0000000040200000 - 00000000da99f000 (usable)
[ 0.000000] BIOS-e820: 00000000da99f000 - 00000000dae9f000 (reserved)
[ 0.000000] BIOS-e820: 00000000dae9f000 - 00000000daf9f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000daf9f000 - 00000000dafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dafff000 - 00000000db000000 (usable)
[ 0.000000] BIOS-e820: 00000000db000000 - 00000000dfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed08000 - 00000000fed09000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffd20000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000021e600000 (usable)
[ 0.000000] BIOS-e820: 000000021e600000 - 000000021e800000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: LENOVO 4290LL6/4290LL6, BIOS 8DET56WW (1.26 ) 12/01/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x21e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask F00000000 write-back
[ 0.000000] 7 base 200000000 mask FE0000000 write-back
[ 0.000000] 8 base 21F000000 mask FFF000000 uncachable
[ 0.000000] 9 base 21E800000 mask FFF800000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000db000000
[ 0.000000] 0000000000 - 00db000000 page 2M
[ 0.000000] kernel direct mapping tables up to db000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000021e600000
[ 0.000000] 0100000000 - 021e600000 page 2M
[ 0.000000] kernel direct mapping tables up to 21e600000 @ da995000-da99f000
[ 0.000000] RAMDISK: 364e6000 - 3726b000
[ 0.000000] ACPI: RSDP 00000000000f00e0 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000daffe120 000A4 (v01 LENOVO TP-8D 00001260 PTEC 00000002)
[ 0.000000] ACPI: FACP 00000000dafe7000 000F4 (v04 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: DSDT 00000000dafea000 0F6B2 (v01 LENOVO TP-8D 00001260 INTL 20061109)
[ 0.000000] ACPI: FACS 00000000daf2d000 00040
[ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 LENOVO TP-8D 00001260 PTEC 00000001)
[ 0.000000] ACPI: SSDT 00000000daffc000 00249 (v01 LENOVO TP-SSDT2 00000200 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffb000 00033 (v01 LENOVO TP-SSDT1 00000100 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000daffa000 007D1 (v01 LENOVO SataAhci 00001000 INTL 20061109)
[ 0.000000] ACPI: HPET 00000000dafe6000 00038 (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: APIC 00000000dafe5000 00098 (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: MCFG 00000000dafe4000 0003C (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: ECDT 00000000dafe3000 00052 (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: ASF! 00000000dafe9000 000A5 (v32 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: TCPA 00000000dafe2000 00032 (v02 PTL LENOVO 06040000 LNVO 00000001)
[ 0.000000] ACPI: SSDT 00000000dafe1000 009A3 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 00000000dafe0000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 00000000dafdf000 0003E (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: UEFI 00000000dafde000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: UEFI 00000000dafdd000 00292 (v01 LENOVO TP-8D 00001260 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000021e600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000021e600000
[ 0.000000] NODE_DATA [000000021e5fb000 - 000000021e5fffff]
[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880215c00000-ffff88021dbfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0021e600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040000
[ 0.000000] 0: 0x00040200 -> 0x000da99f
[ 0.000000] 0: 0x000dafff -> 0x000db000
[ 0.000000] 0: 0x00100000 -> 0x0021e600
[ 0.000000] On node 0 totalpages: 2067245
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 873952 pages, LIFO batch:31
[ 0.000000] Normal zone: 18328 pages used for memmap
[ 0.000000] Normal zone: 1154664 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[ 0.000000] PM: Registered nosave memory: 00000000da99f000 - 00000000dae9f000
[ 0.000000] PM: Registered nosave memory: 00000000dae9f000 - 00000000daf9f000
[ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000
[ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000
[ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd20000
[ 0.000000] PM: Registered nosave memory: 00000000ffd20000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00000:18600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021e200000 s83072 r8192 d23424 u262144
[ 0.000000] pcpu-alloc: s83072 r8192 d23424 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2032528
[ 0.000000] Policy zone: Normal
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8041264k/8886272k available (6566k kernel code, 617292k absent, 227716k reserved, 6637k data, 920k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16640 nr_irqs:744 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] vt handoff: transparent VT on vt#7
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.004000] Detected 2292.750 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4585.50 BogoMIPS (lpj=9171000)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000027] Security Framework initialized
[ 0.000039] AppArmor: AppArmor initialized
[ 0.000040] Yama: becoming mindful.
[ 0.000796] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002591] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003319] Mount-cache hash table entries: 256
[ 0.003420] Initializing cgroup subsys cpuacct
[ 0.003424] Initializing cgroup subsys memory
[ 0.003431] Initializing cgroup subsys devices
[ 0.003433] Initializing cgroup subsys freezer
[ 0.003434] Initializing cgroup subsys blkio
[ 0.003439] Initializing cgroup subsys perf_event
[ 0.003463] Disabled fast string operations
[ 0.003466] CPU: Physical Processor ID: 0
[ 0.003467] CPU: Processor Core ID: 0
[ 0.003471] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.003472] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.003475] mce: CPU supports 7 MCE banks
[ 0.003487] CPU0: Thermal monitoring enabled (TM1)
[ 0.003495] using mwait in idle threads.
[ 0.005395] ACPI: Core revision 20110623
[ 0.013037] ftrace: allocating 27049 entries in 107 pages
[ 0.021542] x2apic not enabled, IRQ remapping init failed
[ 0.021954] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061583] CPU0: Intel(R) Core(TM) i3-2350M CPU @ 2.30GHz stepping 07
[ 0.168115] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
[ 0.168120] PEBS disabled due to CPU errata.
[ 0.168122] ... version: 3
[ 0.168123] ... bit width: 48
[ 0.168124] ... generic registers: 4
[ 0.168126] ... value mask: 0000ffffffffffff
[ 0.168127] ... max period: 000000007fffffff
[ 0.168128] ... fixed-purpose events: 3
[ 0.168129] ... event mask: 000000070000000f
[ 0.168291] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.168364] Booting Node 0, Processors #1
[ 0.168366] smpboot cpu 1: start_ip = 98000
[ 0.255991] Disabled fast string operations
[ 0.276114] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.276198] #2
[ 0.276199] smpboot cpu 2: start_ip = 98000
[ 0.363825] Disabled fast string operations
[ 0.383935] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.384011] #3
[ 0.384013] smpboot cpu 3: start_ip = 98000
[ 0.471660] Disabled fast string operations
[ 0.491748] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.491776] Brought up 4 CPUs
[ 0.491777] Total of 4 processors activated (18340.35 BogoMIPS).
[ 0.495489] devtmpfs: initialized
[ 0.496289] EVM: security.selinux
[ 0.496290] EVM: security.SMACK64
[ 0.496291] EVM: security.capability
[ 0.496314] PM: Registering ACPI NVS region at dae9f000 (1048576 bytes)
[ 0.497041] print_constraints: dummy:
[ 0.497071] RTC time: 14:14:00, date: 05/16/13
[ 0.497098] NET: Registered protocol family 16
[ 0.497188] Trying to unpack rootfs image as initramfs...
[ 0.497195] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.497197] ACPI: bus type pci registered
[ 0.497430] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.497433] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.509713] PCI: Using configuration type 1 for base access
[ 0.510565] bio: create slab at 0
[ 0.510640] ACPI: Added _OSI(Module Device)
[ 0.510642] ACPI: Added _OSI(Processor Device)
[ 0.510644] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.510645] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.512273] ACPI: EC: EC description table is found, configuring boot EC
[ 0.516715] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.600015] ACPI: SSDT 00000000dae8c018 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.600434] ACPI: Dynamic OEM Table Load:
[ 0.600436] ACPI: SSDT (null) 008C0 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.631651] ACPI: SSDT 00000000dae8da98 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.632096] ACPI: Dynamic OEM Table Load:
[ 0.632099] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.655482] ACPI: SSDT 00000000dae8bd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.655894] ACPI: Dynamic OEM Table Load:
[ 0.655896] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.679888] ACPI: Interpreter enabled
[ 0.679892] ACPI: (supports S0 S3 S4 S5)
[ 0.679911] ACPI: Using IOAPIC for interrupt routing
[ 0.711672] ACPI: Power Resource [PUBS] (on)
[ 0.714183] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.715263] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[ 0.715265] HEST: Table not found.
[ 0.715268] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.715376] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.715426] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.715429] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.715432] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.715435] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfebfffff]
[ 0.715437] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed4bfff]
[ 0.715449] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[ 0.715487] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[ 0.715497] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.715504] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.715508] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]
[ 0.715564] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[ 0.715588] pci 0000:00:16.0: reg 10: [mem 0xf2525000-0xf252500f 64bit]
[ 0.715667] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.715672] pci 0000:00:16.0: PME# disabled
[ 0.715702] pci 0000:00:19.0: [8086:1502] type 0 class 0x000200
[ 0.715721] pci 0000:00:19.0: reg 10: [mem 0xf2500000-0xf251ffff]
[ 0.715730] pci 0000:00:19.0: reg 14: [mem 0xf252b000-0xf252bfff]
[ 0.715739] pci 0000:00:19.0: reg 18: [io 0x5080-0x509f]
[ 0.715804] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.715808] pci 0000:00:19.0: PME# disabled
[ 0.715833] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[ 0.715855] pci 0000:00:1a.0: reg 10: [mem 0xf252a000-0xf252a3ff]
[ 0.715946] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.715951] pci 0000:00:1a.0: PME# disabled
[ 0.715976] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[ 0.715992] pci 0000:00:1b.0: reg 10: [mem 0xf2520000-0xf2523fff 64bit]
[ 0.716063] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.716067] pci 0000:00:1b.0: PME# disabled
[ 0.716092] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[ 0.716172] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.716176] pci 0000:00:1c.0: PME# disabled
[ 0.716200] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[ 0.716280] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.716285] pci 0000:00:1c.1: PME# disabled
[ 0.716309] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[ 0.716389] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.716394] pci 0000:00:1c.3: PME# disabled
[ 0.716421] pci 0000:00:1c.4: [8086:1c18] type 1 class 0x000604
[ 0.716552] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.716557] pci 0000:00:1c.4: PME# disabled
[ 0.716596] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[ 0.716617] pci 0000:00:1d.0: reg 10: [mem 0xf2529000-0xf25293ff]
[ 0.716709] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.716713] pci 0000:00:1d.0: PME# disabled
[ 0.716738] pci 0000:00:1f.0: [8086:1c4f] type 0 class 0x000601
[ 0.716867] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[ 0.716886] pci 0000:00:1f.2: reg 10: [io 0x50a8-0x50af]
[ 0.716894] pci 0000:00:1f.2: reg 14: [io 0x50bc-0x50bf]
[ 0.716902] pci 0000:00:1f.2: reg 18: [io 0x50a0-0x50a7]
[ 0.716911] pci 0000:00:1f.2: reg 1c: [io 0x50b8-0x50bb]
[ 0.716919] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]
[ 0.716928] pci 0000:00:1f.2: reg 24: [mem 0xf2528000-0xf25287ff]
[ 0.716974] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.716978] pci 0000:00:1f.2: PME# disabled
[ 0.716996] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[ 0.717013] pci 0000:00:1f.3: reg 10: [mem 0xf2524000-0xf25240ff 64bit]
[ 0.717035] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf]
[ 0.717109] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.717203] pci 0000:03:00.0: [8086:0084] type 0 class 0x000280
[ 0.717248] pci 0000:03:00.0: reg 10: [mem 0xf2400000-0xf2401fff 64bit]
[ 0.717467] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.717475] pci 0000:03:00.0: PME# disabled
[ 0.723293] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.723301] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.723354] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.723358] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.723363] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.723369] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.723670] pci 0000:0d:00.0: [1180:e823] type 0 class 0x000880
[ 0.723690] pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.723717] pci 0000:0d:00.0: reg 10: [mem 0xf1400000-0xf14000ff]
[ 0.723914] pci 0000:0d:00.0: supports D1 D2
[ 0.723916] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.723922] pci 0000:0d:00.0: PME# disabled
[ 0.731437] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.731442] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.731447] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.731457] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.731486] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.731572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.731594] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.731615] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.731637] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.731754] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.731889] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d
[ 0.731890] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.733681] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.733733] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.733782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.733830] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.733878] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11)
[ 0.733919] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.733967] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.734016] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[ 0.734121] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.734127] vgaarb: loaded
[ 0.734128] vgaarb: bridge control possible 0000:00:02.0
[ 0.734200] Freeing initrd memory: 13844k freed
[ 0.734212] i2c-core: driver [aat2870] using legacy suspend method
[ 0.734213] i2c-core: driver [aat2870] using legacy resume method
[ 0.734269] SCSI subsystem initialized
[ 0.734329] libata version 3.00 loaded.
[ 0.734368] usbcore: registered new interface driver usbfs
[ 0.734376] usbcore: registered new interface driver hub
[ 0.734405] usbcore: registered new device driver usb
[ 0.734481] PCI: Using ACPI for IRQ routing
[ 0.736153] PCI: pci_cache_line_size set to 64 bytes
[ 0.736500] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.736502] reserve RAM buffer: 00000000da99f000 - 00000000dbffffff
[ 0.736504] reserve RAM buffer: 00000000db000000 - 00000000dbffffff
[ 0.736506] reserve RAM buffer: 000000021e600000 - 000000021fffffff
[ 0.736604] NetLabel: Initializing
[ 0.736606] NetLabel: domain hash size = 128
[ 0.736607] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.736615] NetLabel: unlabeled traffic allowed by default
[ 0.736672] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.736678] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.738688] Switching to clocksource hpet
[ 0.743548] AppArmor: AppArmor Filesystem Enabled
[ 0.743570] pnp: PnP ACPI init
[ 0.743582] ACPI: bus type pnp registered
[ 0.743899] pnp 00:00: [mem 0x00000000-0x0009ffff]
[ 0.743901] pnp 00:00: [mem 0x000c0000-0x000c3fff]
[ 0.743904] pnp 00:00: [mem 0x000c4000-0x000c7fff]
[ 0.743905] pnp 00:00: [mem 0x000c8000-0x000cbfff]
[ 0.743907] pnp 00:00: [mem 0x000cc000-0x000cffff]
[ 0.743908] pnp 00:00: [mem 0x000d0000-0x000d3fff]
[ 0.743910] pnp 00:00: [mem 0x000d4000-0x000d7fff]
[ 0.743911] pnp 00:00: [mem 0x000d8000-0x000dbfff]
[ 0.743913] pnp 00:00: [mem 0x000dc000-0x000dffff]
[ 0.743914] pnp 00:00: [mem 0x000e0000-0x000e3fff]
[ 0.743916] pnp 00:00: [mem 0x000e4000-0x000e7fff]
[ 0.743917] pnp 00:00: [mem 0x000e8000-0x000ebfff]
[ 0.743919] pnp 00:00: [mem 0x000ec000-0x000effff]
[ 0.743920] pnp 00:00: [mem 0x000f0000-0x000fffff]
[ 0.743922] pnp 00:00: [mem 0x00100000-0xdf9fffff]
[ 0.743924] pnp 00:00: [mem 0xfec00000-0xfed3ffff]
[ 0.743925] pnp 00:00: [mem 0xfed4c000-0xffffffff]
[ 0.743973] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.743976] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[ 0.743978] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[ 0.743980] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[ 0.743982] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[ 0.743984] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[ 0.743986] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[ 0.743988] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[ 0.743990] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[ 0.743992] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[ 0.743994] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[ 0.743996] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[ 0.743998] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[ 0.744000] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.744002] system 00:00: [mem 0x00100000-0xdf9fffff] could not be reserved
[ 0.744004] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[ 0.744007] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[ 0.744010] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.744028] pnp 00:01: [bus 00-fe]
[ 0.744030] pnp 00:01: [io 0x0cf8-0x0cff]
[ 0.744032] pnp 00:01: [io 0x0000-0x0cf7 window]
[ 0.744034] pnp 00:01: [io 0x0d00-0xffff window]
[ 0.744035] pnp 00:01: [mem 0x000a0000-0x000bffff window]
[ 0.744037] pnp 00:01: [mem 0x000c0000-0x000c3fff window]
[ 0.744039] pnp 00:01: [mem 0x000c4000-0x000c7fff window]
[ 0.744040] pnp 00:01: [mem 0x000c8000-0x000cbfff window]
[ 0.744042] pnp 00:01: [mem 0x000cc000-0x000cffff window]
[ 0.744044] pnp 00:01: [mem 0x000d0000-0x000d3fff window]
[ 0.744045] pnp 00:01: [mem 0x000d4000-0x000d7fff window]
[ 0.744047] pnp 00:01: [mem 0x000d8000-0x000dbfff window]
[ 0.744049] pnp 00:01: [mem 0x000dc000-0x000dffff window]
[ 0.744050] pnp 00:01: [mem 0x000e0000-0x000e3fff window]
[ 0.744052] pnp 00:01: [mem 0x000e4000-0x000e7fff window]
[ 0.744054] pnp 00:01: [mem 0x000e8000-0x000ebfff window]
[ 0.744055] pnp 00:01: [mem 0x000ec000-0x000effff window]
[ 0.744057] pnp 00:01: [mem 0xdfa00000-0xfebfffff window]
[ 0.744059] pnp 00:01: [mem 0xfed40000-0xfed4bfff window]
[ 0.744105] pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.744155] pnp 00:02: [io 0x0010-0x001f]
[ 0.744157] pnp 00:02: [io 0x0090-0x009f]
[ 0.744158] pnp 00:02: [io 0x0024-0x0025]
[ 0.744159] pnp 00:02: [io 0x0028-0x0029]
[ 0.744161] pnp 00:02: [io 0x002c-0x002d]
[ 0.744162] pnp 00:02: [io 0x0030-0x0031]
[ 0.744164] pnp 00:02: [io 0x0034-0x0035]
[ 0.744165] pnp 00:02: [io 0x0038-0x0039]
[ 0.744168] pnp 00:02: [io 0x003c-0x003d]
[ 0.744169] pnp 00:02: [io 0x00a4-0x00a5]
[ 0.744171] pnp 00:02: [io 0x00a8-0x00a9]
[ 0.744172] pnp 00:02: [io 0x00ac-0x00ad]
[ 0.744173] pnp 00:02: [io 0x00b0-0x00b5]
[ 0.744175] pnp 00:02: [io 0x00b8-0x00b9]
[ 0.744176] pnp 00:02: [io 0x00bc-0x00bd]
[ 0.744178] pnp 00:02: [io 0x0050-0x0053]
[ 0.744179] pnp 00:02: [io 0x0072-0x0077]
[ 0.744181] pnp 00:02: [io 0x0400-0x047f]
[ 0.744182] pnp 00:02: [io 0x0500-0x057f]
[ 0.744183] pnp 00:02: [io 0x0800-0x080f]
[ 0.744185] pnp 00:02: [io 0x15e0-0x15ef]
[ 0.744186] pnp 00:02: [io 0x1600-0x167f]
[ 0.744188] pnp 00:02: [mem 0xf8000000-0xfbffffff]
[ 0.744189] pnp 00:02: [mem 0x00000000-0x00000fff]
[ 0.744191] pnp 00:02: [mem 0xfed1c000-0xfed1ffff]
[ 0.744192] pnp 00:02: [mem 0xfed10000-0xfed13fff]
[ 0.744194] pnp 00:02: [mem 0xfed18000-0xfed18fff]
[ 0.744195] pnp 00:02: [mem 0xfed19000-0xfed19fff]
[ 0.744197] pnp 00:02: [mem 0xfed45000-0xfed4bfff]
[ 0.744240] system 00:02: [io 0x0400-0x047f] has been reserved
[ 0.744242] system 00:02: [io 0x0500-0x057f] has been reserved
[ 0.744244] system 00:02: [io 0x0800-0x080f] has been reserved
[ 0.744246] system 00:02: [io 0x15e0-0x15ef] has been reserved
[ 0.744248] system 00:02: [io 0x1600-0x167f] has been reserved
[ 0.744251] system 00:02: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.744253] system 00:02: [mem 0x00000000-0x00000fff] could not be reserved
[ 0.744255] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.744257] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.744259] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.744261] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.744263] system 00:02: [mem 0xfed45000-0xfed4bfff] has been reserved
[ 0.744266] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.744302] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.744324] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.744331] pnp 00:04: [io 0x0000-0x000f]
[ 0.744333] pnp 00:04: [io 0x0080-0x008f]
[ 0.744334] pnp 00:04: [io 0x00c0-0x00df]
[ 0.744336] pnp 00:04: [dma 4]
[ 0.744357] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.744363] pnp 00:05: [io 0x0061]
[ 0.744383] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.744389] pnp 00:06: [io 0x00f0]
[ 0.744398] pnp 00:06: [irq 13]
[ 0.744420] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.744426] pnp 00:07: [io 0x0070-0x0071]
[ 0.744431] pnp 00:07: [irq 8]
[ 0.744452] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.744459] pnp 00:08: [io 0x0060]
[ 0.744460] pnp 00:08: [io 0x0064]
[ 0.744465] pnp 00:08: [irq 1]
[ 0.744485] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.744494] pnp 00:09: [irq 12]
[ 0.744516] pnp 00:09: Plug and Play ACPI device, IDs LEN0020 PNP0f13 (active)
[ 0.744543] pnp 00:0a: [mem 0xfed40000-0xfed44fff]
[ 0.744568] pnp 00:0a: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[ 0.745030] pnp: PnP ACPI: found 11 devices
[ 0.745031] ACPI: ACPI bus type pnp unregistered
[ 0.751637] PCI: max bus depth: 1 pci_try_num: 2
[ 0.751678] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.751690] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.751696] pci 0000:00:1c.1: bridge window [mem 0xf2400000-0xf24fffff]
[ 0.751705] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[ 0.751708] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
[ 0.751713] pci 0000:00:1c.3: bridge window [mem 0xf1c00000-0xf23fffff]
[ 0.751718] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.751725] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d]
[ 0.751729] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
[ 0.751735] pci 0000:00:1c.4: bridge window [mem 0xf1400000-0xf1bfffff]
[ 0.751741] pci 0000:00:1c.4: bridge window [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.751762] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.751769] pci 0000:00:1c.0: setting latency timer to 64
[ 0.751779] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.751783] pci 0000:00:1c.1: setting latency timer to 64
[ 0.751793] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.751797] pci 0000:00:1c.3: setting latency timer to 64
[ 0.751804] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.751809] pci 0000:00:1c.4: setting latency timer to 64
[ 0.751813] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.751815] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.751817] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.751819] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfebfffff]
[ 0.751820] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff]
[ 0.751822] pci_bus 0000:03: resource 1 [mem 0xf2400000-0xf24fffff]
[ 0.751824] pci_bus 0000:05: resource 0 [io 0x4000-0x4fff]
[ 0.751826] pci_bus 0000:05: resource 1 [mem 0xf1c00000-0xf23fffff]
[ 0.751828] pci_bus 0000:05: resource 2 [mem 0xf0400000-0xf0bfffff 64bit pref]
[ 0.751830] pci_bus 0000:0d: resource 0 [io 0x3000-0x3fff]
[ 0.751832] pci_bus 0000:0d: resource 1 [mem 0xf1400000-0xf1bfffff]
[ 0.751834] pci_bus 0000:0d: resource 2 [mem 0xf0c00000-0xf13fffff 64bit pref]
[ 0.751860] NET: Registered protocol family 2
[ 0.752077] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.753926] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.755218] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.755344] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.755345] TCP reno registered
[ 0.755360] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.755394] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.755480] NET: Registered protocol family 1
[ 0.755494] pci 0000:00:02.0: Boot video device
[ 0.755509] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.755513] pci 0000:00:1a.0: power state changed by ACPI to D0
[ 0.755521] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.755549] pci 0000:00:1a.0: PCI INT A disabled
[ 0.755569] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.755573] pci 0000:00:1d.0: power state changed by ACPI to D0
[ 0.755583] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.755610] pci 0000:00:1d.0: PCI INT A disabled
[ 0.755672] PCI: CLS 64 bytes, default 64
[ 0.755674] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.755676] Placing 64MB software IO TLB between ffff8800d6995000 - ffff8800da995000
[ 0.755678] software IO TLB at phys 0xd6995000 - 0xda995000
[ 0.756086] audit: initializing netlink socket (disabled)
[ 0.756093] type=2000 audit(1368713639.596:1): initialized
[ 0.787784] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.807446] VFS: Disk quotas dquot_6.5.2
[ 0.807488] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.807885] fuse init (API version 7.17)
[ 0.807958] msgmni has been set to 15732
[ 0.808278] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.808303] io scheduler noop registered
[ 0.808305] io scheduler deadline registered
[ 0.808330] io scheduler cfq registered (default)
[ 0.808611] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.808628] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.808666] intel_idle: MWAIT substates: 0x21120
[ 0.808667] intel_idle: v0.4 model 0x2A
[ 0.808668] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.808875] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.809051] ACPI: AC Adapter [AC] (on-line)
[ 0.809183] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.809450] ACPI: Lid Switch [LID]
[ 0.809483] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.809487] ACPI: Sleep Button [SLPB]
[ 0.809522] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.809525] ACPI: Power Button [PWRF]
[ 0.812042] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.812044] ACPI: Thermal Zone [THM0] (44 C)
[ 0.812059] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.812065] ACPI: Battery Slot [BAT0] (battery present)
[ 0.812086] ERST: Table is not found!
[ 0.812088] GHES: HEST is not enabled!
[ 0.827575] ACPI: Battery Slot [BAT0] (battery present)
[ 1.026568] Linux agpgart interface v0.103
[ 1.026636] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[ 1.026757] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.027893] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.028006] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.029130] brd: module loaded
[ 1.029677] loop: module loaded
[ 1.029776] ahci 0000:00:1f.2: version 3.0
[ 1.029789] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.029832] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
[ 1.029858] ahci: SSS flag set, parallel bus scan disabled
[ 1.042279] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x13 impl SATA mode
[ 1.042288] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst
[ 1.042299] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.058667] scsi0 : ahci
[ 1.058735] scsi1 : ahci
[ 1.058792] scsi2 : ahci
[ 1.058848] scsi3 : ahci
[ 1.058903] scsi4 : ahci
[ 1.058958] scsi5 : ahci
[ 1.059469] ata1: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528100 irq 40
[ 1.059473] ata2: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528180 irq 40
[ 1.059474] ata3: DUMMY
[ 1.059475] ata4: DUMMY
[ 1.059478] ata5: SATA max UDMA/133 abar m2048@0xf2528000 port 0xf2528300 irq 40
[ 1.059480] ata6: DUMMY
[ 1.059789] Fixed MDIO Bus: probed
[ 1.059804] tun: Universal TUN/TAP device driver, 1.6
[ 1.059805] tun: (C) 1999-2004 Max Krasnyansky
[ 1.059849] PPP generic driver version 2.4.2
[ 1.059930] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.059942] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.059946] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 1.059953] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.059969] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.059973] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.060008] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.060035] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.063923] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.063936] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf252a000
[ 1.078190] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.078356] hub 1-0:1.0: USB hub found
[ 1.078360] hub 1-0:1.0: 3 ports detected
[ 1.078410] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.078414] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 1.078420] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.078432] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.078436] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.078469] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.078490] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.082360] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.082373] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf2529000
[ 1.098157] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.098312] hub 2-0:1.0: USB hub found
[ 1.098315] hub 2-0:1.0: 3 ports detected
[ 1.098360] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.098370] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.098403] usbcore: registered new interface driver libusual
[ 1.098430] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 1.101411] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.101417] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.101513] mousedev: PS/2 mouse device common for all mice
[ 1.101659] rtc_cmos 00:07: RTC can wake from S4
[ 1.101761] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.101790] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.101850] device-mapper: uevent: version 1.0.3
[ 1.101906] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.102014] cpuidle: using governor ladder
[ 1.102174] cpuidle: using governor menu
[ 1.102175] EFI Variables Facility v0.08 2004-May-17
[ 1.102333] TCP cubic registered
[ 1.102412] NET: Registered protocol family 10
[ 1.102755] NET: Registered protocol family 17
[ 1.102767] Registering the dns_resolver key type
[ 1.102899] PM: Hibernation image not present or could not be loaded.
[ 1.102908] registered taskstats version 1
[ 1.114210] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 1.118084] Magic number: 13:846:232
[ 1.118194] rtc_cmos 00:07: setting system clock to 2013-05-16 14:14:01 UTC (1368713641)
[ 1.125462] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.125464] EDD information not available.
[ 1.377842] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.378911] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.378924] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.378931] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.379889] ata1.00: ATA-8: HITACHI HTS723232A7A364, EC2ZB70R, max UDMA/100
[ 1.379899] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.381045] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 1.381057] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 1.381065] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.382013] ata1.00: configured for UDMA/100
[ 1.382342] scsi 0:0:0:0: Direct-Access ATA HITACHI HTS72323 EC2Z PQ: 0 ANSI: 5
[ 1.382490] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.382530] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.382681] sd 0:0:0:0: [sda] Write Protect is off
[ 1.382685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.382777] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.389744] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.445237] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 1.445822] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.522339] hub 1-1:1.0: USB hub found
[ 1.522495] hub 1-1:1.0: 6 ports detected
[ 1.633472] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.709346] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.753259] Refined TSC clocksource calibration: 2292.551 MHz.
[ 1.753271] Switching to clocksource tsc
[ 1.766102] hub 2-1:1.0: USB hub found
[ 1.766251] hub 2-1:1.0: 8 ports detected
[ 1.837284] usb 1-1.6: new high-speed USB device number 3 using ehci_hcd
[ 2.028860] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.030442] Freeing unused kernel memory: 920k freed
[ 2.030548] Write protecting the kernel read-only data: 12288k
[ 2.035211] Freeing unused kernel memory: 1608k freed
[ 2.038789] Freeing unused kernel memory: 1196k freed
[ 2.053288] udevd[106]: starting version 175
[ 2.078910] e1000e: Intel(R) PRO/1000 Network Driver - 1.5.1-k
[ 2.078914] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
[ 2.078959] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.078972] e1000e 0000:00:19.0: setting latency timer to 64
[ 2.079109] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 2.092510] sdhci: Secure Digital Host Controller Interface driver
[ 2.092514] sdhci: Copyright(c) Pierre Ossman
[ 2.093033] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4)
[ 2.093256] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.093515] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 2.093529] mmc0: no vmmc regulator found
[ 2.093613] Registered led device: mmc0::
[ 2.094852] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA
[ 2.272074] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GT/s:Width x1) f0:de:f1:c6:30:e8
[ 2.272078] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 2.272131] e1000e 0000:00:19.0: eth0: MAC: 10, PHY: 11, PBA No: 1000FF-0FF
[ 2.499360] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 12.641037] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 12.688242] udevd[399]: starting version 175
[ 12.689768] Adding 8267772k swap on /dev/sda5. Priority:-1 extents:1 across:8267772k
[ 12.709763] lp: driver loaded but no devices found
[ 12.720087] [drm] Initialized drm 1.1.0 20060810
[ 12.734786] i915 0000:00:02.0: power state changed by ACPI to D0
[ 12.734792] i915 0000:00:02.0: power state changed by ACPI to D0
[ 12.734800] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 12.734804] i915 0000:00:02.0: setting latency timer to 64
[ 12.741834] wmi: Mapper loaded
[ 12.741957] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 12.764359] tpm_tis 00:0a: 1.2 TPM (device-id 0x0, rev-id 78)
[ 12.789291] cfg80211: Calling CRDA to update world regulatory domain
[ 12.799749] Non-volatile memory driver v1.3
[ 12.809541] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[ 12.809544] thinkpad_acpi:
[ 12.809547] thinkpad_acpi: ThinkPad BIOS 8DET56WW (1.26 ), EC unknown
[ 12.809549] thinkpad_acpi: Lenovo ThinkPad X220, model 4290LL6
[ 12.812056] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 12.812060] Copyright(c) 2003-2011 Intel Corporation
[ 12.812106] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 12.812118] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 12.812146] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 12.812149] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057e4000
[ 12.812152] iwlwifi 0000:03:00.0: HW Revision ID = 0x0
[ 12.812254] iwlwifi 0000:03:00.0: irq 42 for MSI/MSI-X
[ 12.812299] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[ 12.812383] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 12.818809] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[ 12.819468] mtrr: no more MTRRs available
[ 12.819471] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 12.819898] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 12.819907] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 12.819909] [drm] Driver supports precise vblank timestamp query.
[ 12.819940] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.824086] thinkpad_acpi: radio switch found; radios are enabled
[ 12.825058] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[ 12.826154] Linux video capture interface: v2.00
[ 12.826763] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b217)
[ 12.832565] Registered led device: tpacpi::thinklight
[ 12.832617] Registered led device: tpacpi::power
[ 12.832648] Registered led device: tpacpi::standby
[ 12.832685] Registered led device: tpacpi::thinkvantage
[ 12.832829] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[ 12.833025] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[ 12.833726] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input4
[ 12.834189] iwlwifi 0000:03:00.0: device EEPROM VER=0x15d, CALIB=0x6
[ 12.834192] iwlwifi 0000:03:00.0: Device SKU: 0X50
[ 12.834195] iwlwifi 0000:03:00.0: Valid Tx ant: 0X1, Valid Rx ant: 0X3
[ 12.834803] usbcore: registered new interface driver uvcvideo
[ 12.834806] USB Video Class driver (1.1.1)
[ 12.835731] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[ 12.837642] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 12.924037] type=1400 audit(1368684853.319:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=619 comm="apparmor_parser"
[ 12.924397] type=1400 audit(1368684853.319:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=619 comm="apparmor_parser"
[ 12.924623] type=1400 audit(1368684853.323:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=619 comm="apparmor_parser"
[ 12.925965] type=1400 audit(1368684853.323:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=647 comm="apparmor_parser"
[ 12.926326] type=1400 audit(1368684853.323:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=647 comm="apparmor_parser"
[ 12.926544] type=1400 audit(1368684853.323:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=647 comm="apparmor_parser"
[ 12.931646] cfg80211: World regulatory domain updated:
[ 12.931649] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 12.931652] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.931654] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.931656] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 12.931658] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.931660] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 12.965493] iwlwifi 0000:03:00.0: loaded firmware version 39.31.5.1 build 35138
[ 12.965631] Registered led device: phy0-led
[ 12.965662] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 12.968369] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 13.576031] fbcon: inteldrmfb (fb0) is primary device
[ 13.576100] Console: switching to colour frame buffer device 170x48
[ 13.576119] fb0: inteldrmfb frame buffer device
[ 13.576120] drm: registered panic notifier
[ 13.625127] acpi device:01: registered as cooling_device4
[ 13.625281] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 13.625342] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 13.625921] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.625951] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 13.625959] mei 0000:00:16.0: setting latency timer to 64
[ 13.626031] mei 0000:00:16.0: irq 44 for MSI/MSI-X
[ 13.630720] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 13.630793] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 13.630824] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 13.703159] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro
[ 13.746148] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd001a3/0x940300/0x120c00
[ 13.746168] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[ 13.799441] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 13.868336] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 14.169065] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.169126] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 14.169166] HDMI status: Codec=3 Pin=7 Presence_Detect=0 ELD_Valid=0
[ 14.169229] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 14.169299] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 14.169359] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 15.982157] init: failsafe main process (811) killed by TERM signal
[ 16.035224] Bluetooth: Core ver 2.16
[ 16.035256] NET: Registered protocol family 31
[ 16.035258] Bluetooth: HCI device and connection manager initialized
[ 16.035261] Bluetooth: HCI socket layer initialized
[ 16.035263] Bluetooth: L2CAP socket layer initialized
[ 16.035330] Bluetooth: SCO socket layer initialized
[ 16.045752] Bluetooth: RFCOMM TTY layer initialized
[ 16.045758] Bluetooth: RFCOMM socket layer initialized
[ 16.045761] Bluetooth: RFCOMM ver 1.11
[ 16.048991] ppdev: user-space parallel port driver
[ 16.049276] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.049279] Bluetooth: BNEP filters: protocol multicast
[ 16.063964] type=1400 audit(1368684856.467:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=912 comm="apparmor_parser"
[ 16.071478] type=1400 audit(1368684856.471:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=912 comm="apparmor_parser"
[ 16.071736] type=1400 audit(1368684856.471:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=912 comm="apparmor_parser"
[ 16.074603] type=1400 audit(1368684856.475:11): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=910 comm="apparmor_parser"
[ 16.247811] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 16.303643] e1000e 0000:00:19.0: irq 41 for MSI/MSI-X
[ 16.304242] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.304633] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 16.306194] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 16.370685] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 16.434985] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.435231] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.470048] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 20.730249] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input11
[ 682.228377] usb 2-1.1: new high-speed USB device number 3 using ehci_hcd
[ 682.375115] Initializing USB Mass Storage driver...
[ 682.375320] scsi6 : usb-storage 2-1.1:1.0
[ 682.375436] usbcore: registered new interface driver usb-storage
[ 682.375438] USB Mass Storage support registered.
[ 682.395354] usbcore: registered new interface driver uas
[ 683.372088] scsi 6:0:0:0: Direct-Access SanDisk Cruzer 1.00 PQ: 0 ANSI: 2
[ 683.373553] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 683.376738] sd 6:0:0:0: [sdb] 7837696 512-byte logical blocks: (4.01 GB/3.73 GiB)
[ 683.378349] sd 6:0:0:0: [sdb] Write Protect is off
[ 683.378385] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[ 683.379273] sd 6:0:0:0: [sdb] No Caching mode page present
[ 683.379287] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 683.382877] sd 6:0:0:0: [sdb] No Caching mode page present
[ 683.382887] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 683.391414] sdb: sdb1
[ 683.394470] sd 6:0:0:0: [sdb] No Caching mode page present
[ 683.394483] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 683.394492] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 1583.011888] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 1583.016542] wlan0: authenticated
[ 1583.021446] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 1583.023987] wlan0: RX AssocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=10)
[ 1583.023998] wlan0: associated
[ 1583.031116] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 1593.775044] wlan0: no IPv6 routers present
[ 1606.818280] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 1606.836146] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1606.836158] cfg80211: Restoring regulatory settings
[ 1606.836167] cfg80211: Calling CRDA to update world regulatory domain
[ 1606.844694] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1606.844703] cfg80211: World regulatory domain updated:
[ 1606.844707] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1606.844715] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1606.844721] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1606.844727] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1606.844732] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1606.844737] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1607.435342] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 1607.634486] wlan0: authenticate with 00:26:18:81:85:12 (try 2)
[ 1607.834187] wlan0: authenticate with 00:26:18:81:85:12 (try 3)
[ 1608.033849] wlan0: authentication with 00:26:18:81:85:12 timed out
[ 1613.450567] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 1613.649523] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 1613.849231] wlan0: direct probe to 00:26:18:81:85:12 (try 3/3)
[ 1614.048936] wlan0: direct probe to 00:26:18:81:85:12 timed out
[ 1619.562549] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 1619.760522] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 1619.775833] wlan0: direct probe responded
[ 1619.775975] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 1619.779155] wlan0: authenticated
[ 1619.779762] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 1619.784456] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=10)
[ 1619.784466] wlan0: associated
[ 1826.684465] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 1826.692639] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 1826.692653] cfg80211: Restoring regulatory settings
[ 1826.692664] cfg80211: Calling CRDA to update world regulatory domain
[ 1826.701038] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 1826.701047] cfg80211: World regulatory domain updated:
[ 1826.701051] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 1826.701058] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1826.701064] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1826.701070] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 1826.701075] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1826.701080] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 1832.797673] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 1832.994953] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 1833.194634] wlan0: direct probe to 00:26:18:81:85:12 (try 3/3)
[ 1833.394374] wlan0: direct probe to 00:26:18:81:85:12 timed out
[ 1838.827585] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 1839.025995] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 1839.225696] wlan0: direct probe to 00:26:18:81:85:12 (try 3/3)
[ 1839.228113] wlan0: direct probe responded
[ 1839.233771] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 1839.240018] wlan0: authenticated
[ 1839.240825] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 1839.243249] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 1839.243258] wlan0: associated
[ 2046.361012] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2046.429542] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2046.429556] cfg80211: Restoring regulatory settings
[ 2046.429566] cfg80211: Calling CRDA to update world regulatory domain
[ 2046.438161] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2046.438171] cfg80211: World regulatory domain updated:
[ 2046.438175] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2046.438182] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2046.438188] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2046.438194] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2046.438199] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2046.438204] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2046.945364] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2046.985581] wlan0: authenticated
[ 2046.986898] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2047.071283] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2047.071292] wlan0: associated
[ 2109.133528] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2109.152420] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2109.152436] cfg80211: Restoring regulatory settings
[ 2109.152445] cfg80211: Calling CRDA to update world regulatory domain
[ 2109.160908] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2109.160918] cfg80211: World regulatory domain updated:
[ 2109.160922] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2109.160929] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2109.160934] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2109.160940] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2109.160945] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2109.160950] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2115.144552] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 2115.342569] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 2115.542314] wlan0: direct probe to 00:26:18:81:85:12 (try 3/3)
[ 2115.741978] wlan0: direct probe to 00:26:18:81:85:12 timed out
[ 2121.198819] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2121.204186] wlan0: authenticated
[ 2121.204970] wlan0: waiting for beacon from 00:26:18:81:85:12
[ 2121.243164] wlan0: beacon received
[ 2121.246168] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2121.249916] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2121.249926] wlan0: associated
[ 2128.133514] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2128.147801] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2128.147815] cfg80211: Restoring regulatory settings
[ 2128.147825] cfg80211: Calling CRDA to update world regulatory domain
[ 2128.156106] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2128.156116] cfg80211: World regulatory domain updated:
[ 2128.156120] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2128.156127] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2128.156133] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2128.156139] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2128.156144] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2128.156149] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2128.761598] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2128.764897] wlan0: authenticated
[ 2128.765567] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2128.767868] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2128.767878] wlan0: associated
[ 2266.232583] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2266.302208] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2266.302225] cfg80211: Restoring regulatory settings
[ 2266.302234] cfg80211: Calling CRDA to update world regulatory domain
[ 2266.310533] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2266.310543] cfg80211: World regulatory domain updated:
[ 2266.310547] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2266.310554] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2266.310560] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2266.310565] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2266.310571] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2266.310576] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2272.330091] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 2272.528603] wlan0: direct probe to 00:26:18:81:85:12 (try 2/3)
[ 2272.728301] wlan0: direct probe to 00:26:18:81:85:12 (try 3/3)
[ 2272.928004] wlan0: direct probe to 00:26:18:81:85:12 timed out
[ 2278.381085] wlan0: direct probe to 00:26:18:81:85:12 (try 1/3)
[ 2278.383922] wlan0: direct probe responded
[ 2278.435708] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2278.437698] wlan0: authenticated
[ 2278.438331] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2278.440855] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2278.440864] wlan0: associated
[ 2328.987884] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2329.060899] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2329.060914] cfg80211: Restoring regulatory settings
[ 2329.060924] cfg80211: Calling CRDA to update world regulatory domain
[ 2329.069227] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2329.069237] cfg80211: World regulatory domain updated:
[ 2329.069241] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2329.069248] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2329.069254] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2329.069260] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2329.069265] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2329.069270] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2329.784095] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2329.787956] wlan0: authenticated
[ 2329.791414] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2329.793697] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2329.793710] wlan0: associated
[ 2485.907227] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2485.947158] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2485.947174] cfg80211: Restoring regulatory settings
[ 2485.947184] cfg80211: Calling CRDA to update world regulatory domain
[ 2485.955677] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2485.955687] cfg80211: World regulatory domain updated:
[ 2485.955691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2485.955699] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2485.955705] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2485.955710] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2485.955715] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2485.955720] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2486.498177] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2486.697749] wlan0: authenticate with 00:26:18:81:85:12 (try 2)
[ 2486.699812] wlan0: authenticated
[ 2486.700396] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2486.702743] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2486.702752] wlan0: associated
[ 2548.663328] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2548.681899] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2548.681920] cfg80211: Restoring regulatory settings
[ 2548.681937] cfg80211: Calling CRDA to update world regulatory domain
[ 2548.690302] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2548.690312] cfg80211: World regulatory domain updated:
[ 2548.690316] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2548.690323] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2548.690329] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2548.690334] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2548.690340] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2548.690345] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2549.134589] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2549.137984] wlan0: authenticated
[ 2549.138567] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2549.141393] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2549.141403] wlan0: associated
[ 2569.071683] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2569.095473] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2569.095488] cfg80211: Restoring regulatory settings
[ 2569.095529] cfg80211: Calling CRDA to update world regulatory domain
[ 2569.103975] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2569.103984] cfg80211: World regulatory domain updated:
[ 2569.103988] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2569.103995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2569.104002] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2569.104007] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2569.104012] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2569.104017] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2575.289640] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2575.295665] wlan0: authenticated
[ 2575.295966] wlan0: waiting for beacon from 00:26:18:81:85:12
[ 2575.335412] wlan0: beacon received
[ 2575.353708] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2575.356365] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=6)
[ 2575.356375] wlan0: associated
[ 2705.780824] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2705.795899] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2705.795944] cfg80211: Restoring regulatory settings
[ 2705.795955] cfg80211: Calling CRDA to update world regulatory domain
[ 2705.804379] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2705.804388] cfg80211: World regulatory domain updated:
[ 2705.804392] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2705.804399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2705.804405] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2705.804411] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2705.804416] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2705.804421] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2706.371148] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2706.375998] wlan0: authenticated
[ 2706.376576] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2706.378942] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 2706.378952] wlan0: associated
[ 2768.518796] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2768.590401] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2768.590417] cfg80211: Restoring regulatory settings
[ 2768.590427] cfg80211: Calling CRDA to update world regulatory domain
[ 2768.598700] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2768.598710] cfg80211: World regulatory domain updated:
[ 2768.598714] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2768.598721] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2768.598728] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2768.598733] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2768.598738] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2768.598743] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2769.120153] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2769.123206] wlan0: authenticated
[ 2769.123952] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2769.127185] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 2769.127195] wlan0: associated
[ 2925.659342] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2925.728461] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2925.728477] cfg80211: Restoring regulatory settings
[ 2925.728516] cfg80211: Calling CRDA to update world regulatory domain
[ 2925.736776] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2925.736786] cfg80211: World regulatory domain updated:
[ 2925.736790] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2925.736797] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2925.736804] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2925.736809] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2925.736814] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2925.736819] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2926.303597] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2926.306404] wlan0: authenticated
[ 2926.307869] wlan0: waiting for beacon from 00:26:18:81:85:12
[ 2926.360911] wlan0: beacon received
[ 2926.395200] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2926.397672] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 2926.397682] wlan0: associated
[ 2988.378030] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 2988.447041] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 2988.447056] cfg80211: Restoring regulatory settings
[ 2988.447067] cfg80211: Calling CRDA to update world regulatory domain
[ 2988.455476] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2988.455485] cfg80211: World regulatory domain updated:
[ 2988.455489] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2988.455496] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2988.455503] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2988.455508] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2988.455513] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2988.455519] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2989.086763] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 2989.097663] wlan0: authenticated
[ 2989.098309] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 2989.101514] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 2989.101521] wlan0: associated
[ 3010.003870] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3010.023024] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3010.023069] cfg80211: Restoring regulatory settings
[ 3010.023081] cfg80211: Calling CRDA to update world regulatory domain
[ 3010.031397] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3010.031407] cfg80211: World regulatory domain updated:
[ 3010.031411] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3010.031418] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3010.031424] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3010.031430] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3010.031435] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3010.031440] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3010.508464] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3010.515196] wlan0: authenticated
[ 3010.515796] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3010.518093] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3010.518104] wlan0: associated
[ 3145.326624] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3145.337438] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3145.337453] cfg80211: Restoring regulatory settings
[ 3145.337462] cfg80211: Calling CRDA to update world regulatory domain
[ 3145.345777] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3145.345786] cfg80211: World regulatory domain updated:
[ 3145.345789] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3145.345796] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3145.345802] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3145.345808] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3145.345813] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3145.345818] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3145.833442] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3145.836500] wlan0: authenticated
[ 3145.837230] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3145.845726] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3145.845736] wlan0: associated
[ 3208.230933] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3208.302049] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3208.302095] cfg80211: Restoring regulatory settings
[ 3208.302104] cfg80211: Calling CRDA to update world regulatory domain
[ 3208.310377] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3208.310387] cfg80211: World regulatory domain updated:
[ 3208.310391] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3208.310399] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3208.310405] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3208.310410] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3208.310415] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3208.310420] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3208.799333] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3208.802210] wlan0: authenticated
[ 3208.802877] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3208.807652] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3208.807656] wlan0: associated
[ 3230.072769] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3230.085787] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3230.085802] cfg80211: Restoring regulatory settings
[ 3230.085812] cfg80211: Calling CRDA to update world regulatory domain
[ 3230.094197] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3230.094207] cfg80211: World regulatory domain updated:
[ 3230.094211] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3230.094218] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3230.094224] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3230.094230] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3230.094235] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3230.094240] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3230.661043] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3230.675514] wlan0: authenticated
[ 3230.676258] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3230.694396] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3230.694406] wlan0: associated
[ 3365.188772] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3365.238020] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3365.238035] cfg80211: Restoring regulatory settings
[ 3365.238045] cfg80211: Calling CRDA to update world regulatory domain
[ 3365.246436] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3365.246445] cfg80211: World regulatory domain updated:
[ 3365.246449] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3365.246456] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3365.246462] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3365.246467] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3365.246473] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3365.246478] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3365.770996] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3365.774494] wlan0: authenticated
[ 3365.775087] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3365.789309] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3365.789319] wlan0: associated
[ 3428.087174] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3428.156756] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3428.156771] cfg80211: Restoring regulatory settings
[ 3428.156782] cfg80211: Calling CRDA to update world regulatory domain
[ 3428.165129] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3428.165139] cfg80211: World regulatory domain updated:
[ 3428.165144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3428.165151] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3428.165157] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3428.165163] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3428.165168] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3428.165173] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3428.768959] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3428.776375] wlan0: authenticated
[ 3428.777554] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3428.788316] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3428.788326] wlan0: associated
[ 3584.865007] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 3584.915396] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 3584.915411] cfg80211: Restoring regulatory settings
[ 3584.915421] cfg80211: Calling CRDA to update world regulatory domain
[ 3584.923866] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 3584.923876] cfg80211: World regulatory domain updated:
[ 3584.923880] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 3584.923887] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3584.923893] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3584.923898] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 3584.923903] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3584.923908] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 3585.514510] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 3585.529835] wlan0: authenticated
[ 3585.530455] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 3585.542148] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 3585.542158] wlan0: associated
[ 4024.813279] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 4024.870887] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4024.870902] cfg80211: Restoring regulatory settings
[ 4024.870911] cfg80211: Calling CRDA to update world regulatory domain
[ 4024.879093] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4024.879103] cfg80211: World regulatory domain updated:
[ 4024.879107] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4024.879114] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4024.879120] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4024.879126] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4024.879131] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4024.879136] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4025.317529] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 4025.321139] wlan0: authenticated
[ 4025.321681] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 4025.323965] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=4)
[ 4025.323976] wlan0: associated
[ 4080.941645] wlan0: deauthenticating from 00:26:18:81:85:12 by local choice (reason=3)
[ 4081.012845] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 4081.012851] cfg80211: Restoring regulatory settings
[ 4081.012861] cfg80211: Calling CRDA to update world regulatory domain
[ 4081.017338] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 4081.017342] cfg80211: World regulatory domain updated:
[ 4081.017344] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 4081.017348] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4081.017351] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4081.017354] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 4081.017357] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4081.017360] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 4083.037316] PM: Syncing filesystems ... done.
[ 4083.043019] PM: Preparing system for mem sleep
[ 4083.668299] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 4083.684187] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 4083.700164] PM: Entering mem sleep
[ 4083.700246] Suspending console(s) (use no_console_suspend to debug)
[ 4083.876237] PM: suspend of drv:psmouse dev:serio2 complete after 176.115 msecs
[ 4083.876465] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 4083.876717] sd 0:0:0:0: [sda] Stopping disk
[ 4084.155460] PM: suspend of drv:tpm_tis dev:00:0a complete after 190.597 msecs
[ 4084.156082] ehci_hcd 0000:00:1d.0: PCI INT A disabled
[ 4084.156199] ehci_hcd 0000:00:1a.0: PCI INT A disabled
[ 4084.157372] sdhci-pci 0000:0d:00.0: PCI INT A disabled
[ 4084.171405] i915 0000:00:02.0: power state changed by ACPI to D3
[ 4084.251523] e1000e 0000:00:19.0: PCI INT A disabled
[ 4084.251534] e1000e 0000:00:19.0: PME# enabled
[ 4084.251543] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
[ 4084.267201] PM: suspend of drv:e1000e dev:0000:00:19.0 complete after 111.152 msecs
[ 4084.350210] PM: suspend of drv:sd dev:0:0:0:0 complete after 474.448 msecs
[ 4084.350312] PM: suspend of drv:scsi dev:target0:0:0 complete after 474.502 msecs
[ 4084.350355] PM: suspend of drv:scsi dev:host0 complete after 385.832 msecs
[ 4084.363208] snd_hda_intel 0000:00:1b.0: PCI INT A disabled
[ 4084.379095] PM: suspend of drv:ahci dev:0000:00:1f.2 complete after 223.355 msecs
[ 4084.379110] PM: suspend of drv:snd_hda_intel dev:0000:00:1b.0 complete after 223.245 msecs
[ 4084.379159] PM: suspend of drv: dev:pci0000:00 complete after 223.198 msecs
[ 4084.379176] PM: suspend of devices complete after 679.841 msecs
[ 4084.379179] PM: suspend devices took 0.680 seconds
[ 4084.395206] ehci_hcd 0000:00:1d.0: PME# enabled
[ 4084.395214] ehci_hcd 0000:00:1d.0: wake-up capability enabled by ACPI
[ 4084.411053] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D3
[ 4084.411131] ehci_hcd 0000:00:1a.0: PME# enabled
[ 4084.411138] ehci_hcd 0000:00:1a.0: wake-up capability enabled by ACPI
[ 4084.427032] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D3
[ 4084.443064] PM: late suspend of devices complete after 63.973 msecs
[ 4084.443297] ACPI: Preparing to enter system sleep state S3
[ 4084.614814] PM: Saving platform NVS memory
[ 4084.618844] Disabling non-boot CPUs ...
[ 4084.722569] CPU 1 is now offline
[ 4084.826417] CPU 2 is now offline
[ 4084.930277] CPU 3 is now offline
[ 4084.930619] Extended CMOS year: 2000
[ 4084.930932] ACPI: Low-level resume complete
[ 4084.930972] PM: Restoring platform NVS memory
[ 4084.931839] Extended CMOS year: 2000
[ 4084.931875] Enabling non-boot CPUs ...
[ 4084.931974] Booting Node 0 Processor 1 APIC 0x1
[ 4084.931975] smpboot cpu 1: start_ip = 98000
[ 4084.942988] Calibrating delay loop (skipped) already calibrated this CPU
[ 4084.943003] Disabled fast string operations
[ 4084.963295] NMI watchdog enabled, takes one hw-pmu counter.
[ 4085.043400] CPU1 is up
[ 4085.043492] Booting Node 0 Processor 2 APIC 0x2
[ 4085.043493] smpboot cpu 2: start_ip = 98000
[ 4085.054506] Calibrating delay loop (skipped) already calibrated this CPU
[ 4085.054520] Disabled fast string operations
[ 4085.074848] NMI watchdog enabled, takes one hw-pmu counter.
[ 4085.151239] CPU2 is up
[ 4085.151326] Booting Node 0 Processor 3 APIC 0x3
[ 4085.151327] smpboot cpu 3: start_ip = 98000
[ 4085.162338] Calibrating delay loop (skipped) already calibrated this CPU
[ 4085.162351] Disabled fast string operations
[ 4085.182805] NMI watchdog enabled, takes one hw-pmu counter.
[ 4085.263183] CPU3 is up
[ 4085.267094] ACPI: Waking up from system sleep state S3
[ 4085.458792] ACPI: \_SB_.PCI0.LPC_.EC__.BAT1 - docking
[ 4085.486736] ACPI: Unable to dock!
[ 4085.598602] i915 0000:00:02.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.598611] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
[ 4085.598632] mei 0000:00:16.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.598646] mei 0000:00:16.0: restoring config space at offset 0x4 (was 0xfed0a004, writing 0xf2525004)
[ 4085.598653] mei 0000:00:16.0: restoring config space at offset 0x1 (was 0x100006, writing 0x180006)
[ 4085.598674] e1000e 0000:00:19.0: restoring config space at offset 0xf (was 0x100, writing 0x10a)
[ 4085.598686] e1000e 0000:00:19.0: restoring config space at offset 0x6 (was 0x1, writing 0x5081)
[ 4085.598694] e1000e 0000:00:19.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100007)
[ 4085.598718] ehci_hcd 0000:00:1a.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.598733] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf252a000)
[ 4085.598740] ehci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 4085.598762] ehci_hcd 0000:00:1a.0: wake-up capability disabled by ACPI
[ 4085.598767] ehci_hcd 0000:00:1a.0: PME# disabled
[ 4085.598770] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 4085.598774] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 4085.598790] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 4085.598804] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x4 (was 0x4, writing 0xf2520004)
[ 4085.598808] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 4085.598814] snd_hda_intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100002)
[ 4085.598841] pcieport 0000:00:1c.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.598851] pcieport 0000:00:1c.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 4085.598855] pcieport 0000:00:1c.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0)
[ 4085.598860] pcieport 0000:00:1c.0: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0)
[ 4085.598868] pcieport 0000:00:1c.0: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 4085.598873] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100004)
[ 4085.598907] pcieport 0000:00:1c.1: restoring config space at offset 0xf (was 0x200, writing 0x20b)
[ 4085.598916] pcieport 0000:00:1c.1: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1)
[ 4085.598921] pcieport 0000:00:1c.1: restoring config space at offset 0x8 (was 0x0, writing 0xf240f240)
[ 4085.598925] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0x0, writing 0x200000f0)
[ 4085.598933] pcieport 0000:00:1c.1: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 4085.598939] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 4085.598970] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x400, writing 0x40a)
[ 4085.598980] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf0b1f041)
[ 4085.598984] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xf230f1c0)
[ 4085.598989] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040)
[ 4085.598997] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 4085.599002] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 4085.599043] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.599056] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0xf131f0c1)
[ 4085.599062] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf1b0f140)
[ 4085.599067] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x3030)
[ 4085.599078] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010)
[ 4085.599085] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100007)
[ 4085.599123] ehci_hcd 0000:00:1d.0: restoring config space at offset 0xf (was 0x100, writing 0x107)
[ 4085.599138] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2529000)
[ 4085.599145] ehci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900002)
[ 4085.599161] ehci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI
[ 4085.599166] ehci_hcd 0000:00:1d.0: PME# disabled
[ 4085.599168] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 4085.599172] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 4085.599233] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00403, writing 0x2b00407)
[ 4085.599312] iwlwifi 0000:03:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10b)
[ 4085.599351] iwlwifi 0000:03:00.0: restoring config space at offset 0x4 (was 0x4, writing 0xf2400004)
[ 4085.599359] iwlwifi 0000:03:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10)
[ 4085.599371] iwlwifi 0000:03:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100006)
[ 4085.599522] sdhci-pci 0000:0d:00.0: restoring config space at offset 0xf (was 0x1ff, writing 0x10b)
[ 4085.599559] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x2 (was 0x8800104, writing 0x8800107)
[ 4085.599565] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100002, writing 0x100006)
[ 4085.599571] sdhci-pci 0000:0d:00.0: restoring config space at offset 0x0 (was 0xe8231180, writing 0xe8221180)
[ 4085.599611] sdhci-pci 0000:0d:00.0: MMC controller base frequency changed to 50Mhz.
[ 4085.599703] PM: early resume of devices complete after 1.150 msecs
[ 4085.599828] mei 0000:00:16.0: irq 41 for MSI/MSI-X
[ 4085.599844] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
[ 4085.599853] e1000e 0000:00:19.0: PME# disabled
[ 4085.599918] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 4085.600104] i915 0000:00:02.0: power state changed by ACPI to D0
[ 4085.600128] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 4085.600466] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 4085.600506] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 4085.600514] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 4085.600545] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 4085.600581] ahci 0000:00:1f.2: setting latency timer to 64
[ 4085.600700] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4085.600772] sd 0:0:0:0: [sda] Starting disk
[ 4085.600800] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 4085.600803] i915 0000:00:02.0: power state changed by ACPI to D0
[ 4085.600806] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4085.600808] i915 0000:00:02.0: setting latency timer to 64
[ 4085.600812] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 4085.600814] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4085.600822] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4085.600828] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4085.601844] watchdog: only one watchdog can use /dev/watchdog.
[ 4085.601846] watchdog: error registering /dev/watchdog (err=-16).
[ 4085.601847] mei: unable to register watchdog device.
[ 4085.722806] PM: resume of drv:usb-storage dev:2-1.1:1.0 complete after 122.189 msecs
[ 4085.722842] PM: resume of drv:scsi dev:host6 complete after 122.219 msecs
[ 4085.722872] PM: resume of drv:scsi dev:target6:0:0 complete after 122.239 msecs
[ 4085.722891] PM: resume of drv: dev:ep_00 complete after 122.279 msecs
[ 4085.722895] PM: resume of drv:scsi_host dev:host6 complete after 122.259 msecs
[ 4085.722899] PM: resume of drv: dev:ep_02 complete after 122.282 msecs
[ 4085.722902] PM: resume of drv:sd dev:6:0:0:0 complete after 122.262 msecs
[ 4085.722909] PM: resume of drv:scsi_device dev:6:0:0:0 complete after 122.258 msecs
[ 4085.722914] PM: resume of drv: dev:ep_81 complete after 122.307 msecs
[ 4085.778284] PM: resume of drv: dev:ep_00 complete after 177.962 msecs
[ 4085.778294] PM: resume of drv:hub dev:1-1:1.0 complete after 178.011 msecs
[ 4085.778313] PM: resume of drv: dev:ep_81 complete after 178.032 msecs
[ 4085.847740] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 248.315 msecs
[ 4085.850167] usb 1-1.6: reset high-speed USB device number 3 using ehci_hcd
[ 4085.926017] ata5: SATA link down (SStatus 0 SControl 300)
[ 4085.934010] ata2: SATA link down (SStatus 0 SControl 300)
[ 4085.952245] PM: resume of drv:uvcvideo dev:1-1.6:1.0 complete after 351.994 msecs
[ 4085.952281] PM: resume of drv: dev:ep_00 complete after 352.015 msecs
[ 4085.952331] PM: resume of drv:uvcvideo dev:1-1.6:1.1 complete after 352.082 msecs
[ 4085.952334] PM: resume of drv: dev:ep_81 complete after 352.089 msecs
[ 4085.963192] PM: resume of drv:i915 dev:0000:00:02.0 complete after 363.951 msecs
[ 4086.101995] sdhci-pci 0000:0d:00.0: setting latency timer to 64
[ 4086.102064] PM: resume of drv:sdhci-pci dev:0000:0d:00.0 complete after 502.946 msecs
[ 4087.431771] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4087.432925] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4087.432935] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4087.432942] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4087.435312] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[ 4087.435323] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 4087.435330] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 4087.436321] ata1.00: configured for UDMA/100
[ 4087.466298] PM: resume of drv:sd dev:0:0:0:0 complete after 1868.601 msecs
[ 4087.466337] PM: resume of drv:scsi_device dev:0:0:0:0 complete after 1868.624 msecs
[ 4087.466372] PM: resume of drv:scsi_disk dev:0:0:0:0 complete after 1833.610 msecs
[ 4087.467270] PM: resume of devices complete after 1870.321 msecs
[ 4087.467352] PM: resume devices took 1.868 seconds
[ 4087.467468] PM: Finishing wakeup.
[ 4087.467470] Restarting tasks ... done.
[ 4087.477615] video LNXVIDEO:00: Restoring backlight state
[ 4087.478610] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
[ 4088.104740] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 4088.162660] e1000e 0000:00:19.0: irq 44 for MSI/MSI-X
[ 4088.163486] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4088.164636] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 4088.235801] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 5346.566348] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 5346.569448] wlan0: authenticated
[ 5346.570367] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 5346.572521] wlan0: RX AssocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=13)
[ 5346.572525] wlan0: associated
[ 5346.577709] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 5356.901696] wlan0: no IPv6 routers present
[ 5541.808599] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 5541.826527] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5541.826533] cfg80211: Restoring regulatory settings
[ 5541.826537] cfg80211: Calling CRDA to update world regulatory domain
[ 5541.832349] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5541.832353] cfg80211: World regulatory domain updated:
[ 5541.832355] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5541.832359] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5541.832362] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5541.832364] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5541.832367] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5541.832370] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5542.495357] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 5542.498041] wlan0: authenticated
[ 5542.505557] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 5542.522729] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=12)
[ 5542.522732] wlan0: associated
[ 5587.694292] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5587.694298] cfg80211: Restoring regulatory settings
[ 5587.694301] cfg80211: Calling CRDA to update world regulatory domain
[ 5587.698119] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5587.698125] cfg80211: World regulatory domain updated:
[ 5587.698128] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5587.698132] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5587.698137] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5587.698141] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5587.698145] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5587.698149] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5588.292733] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 5588.296998] wlan0: authenticated
[ 5588.301356] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 5588.303544] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=12)
[ 5588.303548] wlan0: associated
[ 5602.807470] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 5602.845603] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5602.845608] cfg80211: Restoring regulatory settings
[ 5602.845612] cfg80211: Calling CRDA to update world regulatory domain
[ 5602.853112] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5602.853116] cfg80211: World regulatory domain updated:
[ 5602.853118] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5602.853122] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5602.853125] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5602.853127] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5602.853130] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5602.853133] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5603.488593] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 5603.494911] wlan0: authenticated
[ 5603.495247] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 5603.500943] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=12)
[ 5603.500947] wlan0: associated
[ 5761.483984] wlan0: deauthenticated from 00:26:18:81:85:12 (Reason: 1)
[ 5761.511461] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 5761.511467] cfg80211: Restoring regulatory settings
[ 5761.511471] cfg80211: Calling CRDA to update world regulatory domain
[ 5761.517603] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 5761.517607] cfg80211: World regulatory domain updated:
[ 5761.517610] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 5761.517613] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5761.517616] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5761.517619] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 5761.517621] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5761.517624] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 5762.073729] wlan0: authenticate with 00:26:18:81:85:12 (try 1)
[ 5762.078037] wlan0: authenticated
[ 5762.079059] wlan0: associate with 00:26:18:81:85:12 (try 1)
[ 5762.087646] wlan0: RX ReassocResp from 00:26:18:81:85:12 (capab=0x401 status=0 aid=12)
[ 5762.087650] wlan0: associated